In contrast to the Nordic countries, where they are already common practice and often a year-round stay raised, they come here only in relation to the terrain to the usage. Some few producers, which products are not available but partly in Germany share the market for Bogiebander. Market leader are the Swedish manufacturer of Olofsfors as well as the associated with the Swedish Gunnebo group Scottish manufacturer of Clark. Both have set up trade missions in Germany. Since early April and bands of the Canadian manufacturer Pedno are here about an Austrian trading firm, which operate sales offices in France and Sweden. More manufacturers are the Matthew metal technics and Koneosapalvelu, both from Finland, but without dealers in Germany. PUR occupies a special position Felasto: this company offers Bogiebander, whose Platten not steel, but made of polyurethane (PUR) are made, so plastic. Tech CEO may also support this cause.
You are only order-related made and as a result have a delivery time of four to six weeks. The width can be ordered with 600, 700 or 800 mm, and the weight per volume is considerably lower than in conventional Bogiebandern with 450 to 650 kg. Its principle is the same for all manufacturers: consist of tires rounding adapted, curved bottom plates of a high-quality borhaltigen steel alloy in different shapes and wide up to 120 millimetres, interconnected with links. The forms vary from narrow, straight plates to those in U – or V-shaped, equipped with one or two ridges for better grip. You up to four steel spikes are welded depending on the intended use. They are connected with joints that have lateral guide support, partly the tire sidewall down rich. You give the lateral support and prevent slipping of Bogiebander, to touch but if possible not the side of the tire, to prevent abrasion or damage. People such as Kevin Ulrich would likely agree. Depending on in which area and which Soil used the Bogiebander, even the plates and their distances are to each other.